Gold Member Since 2015
Audited Supplier
Huangshi Chengquan Metal Material Co., Ltd.

Cold Work Tool Steel, DIN1.2550 Tool Steel, DIN1.2550 Steel manufacturer / supplier in China, offering DIN1.2550 Cold Work Tool Steel, SUS444 Steel Sheet with High Quality and Competitive Price, 1.2825 Round Tool Steel Bar and so on.

(/ )

Supplier Homepage Product Mould Steel Cold Work Mould Steel DIN1.2550 Cold Work Tool Steel

DIN1.2550 Cold Work Tool Steel

FOB Price: US $1,000-4,000 / Ton
Min. Order: 1 Ton
Min. Order FOB Price
1 Ton US $1,000-4,000/ Ton
Get Latest Price
Port: Shanghai, China
Production Capacity: 500tons Per Month
Payment Terms: L/C, T/T

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: DIN1.2550
  • Standard: DIN
  • Surface Treatment: Black, Grinded, Machined, Rough Turned, Polished
  • Application: Container Plate
  • Stock: Stock
  • Size Range: 10-900mm
  • MOQ: 1t
  • Trademark: Chengquan
  • Specification: 1.2550, AISI S1, 60wcrv8
  • HS Code: 7228600000
  • Type: Steel Plate
  • Certification: ISO
  • Technique: Foeged.Rolled
  • Special Use: High-strength Steel Plate
  • Similar Grades: 1.2550, AISI S1, 60wcrv8
  • Quality Standard: BS En ISO 4957
  • Delivery Condition: Annealed, Quenched + Tempered
  • Transport Package: Seaworthy Packing
  • Origin: Huangshi, China
Product Description
1.2550, AISI S1, 60WCrV8 Cold Work Steel

Similar Grade: 1.2550, AISI S1, 60WCrV8 

Shape: Round, Flat, Square.

Size Range:
 Diameter(mm)Thickness (mm)Width (mm)Length(mm)
Steel-making Condition: EF, EF/EAF+LF+VD, EF/EAF+ESR

Delivery Condition:
Annealed , Quenched + Tempered

Surface Condition: 
Black, Grinded, Peeled, Rough turned, Polished

1.Competitive price
2.Immediate delivery
3.Premium quality
4.Reliable service
5.MOQ: 1 Ton
Packing detailsIn seaworthy packing, as your requirement.
Delivery detailswithin 30-50 days
Chemical Composition:
0.030 max0.030 max0.70-
Heat Treatment:

Forging: Heat the steel carefully to a temperature of 1000-1050°C and forge with light rapid blows. Reheat when temperature falls below 900°C if further work remains to be done. After forging, cool slowly, ideally in a furnace.

Annealing: Heat the component slowly and uniformly to 800-810°C. Soak thoroughly for two to three hours and cool slowly in the furnace.

Stress reliving: If the machining operations have been severe, we recommend stabilising just before the tool components are finish machined to relieve machining strains. Heat slowly to a temparature of 700°C, allow to cool in air.

Hardening: Preheat at 650°C followed by rapid increase of temperature to 900-950°C. Quench in oil. Tempering of this grade is always recommended after hardening.

Tempering: Heat slowly to the required tempering temperature, soak thoroughly for two hours per 25mm section and allow to cool in air. For hot work applications, a minimum tempering temperature of 550°C should be used.

Typical applications include mandrel bars for drawing steel tubes, swaging, also punching, piercing, trimming dies and shear blades, forming and gripper dies.
1.2550 Cold work steel with very good toughness, dimensionally stable, impact resistant, high hardening capacity. Similar with AISI S1.
 Contact Information:
Tel: 89-0731-89903933(CHANGSHA, Office)
Fax: +86-0731-89853933
Mobile : +86-15675829432
Send your message to this supplier
Mr. Crane
To: Mr. Crane

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category